Stevens Connect

Supported technology/Weather Station

stevens-connect.com

Direction Data provider
Data Sensor readings (stationary subjects)
Platform Gundi v2
Type Pull integration

Setup You, in the portal

Stevens Connect sends weather station sensor readings to EarthRanger through Gundi. Gundi checks your Stevens Connect account on a schedule, and each sensor shows up as a stationary subject at its station's location.

What you'll receive

We add details here as we confirm what Stevens Connect sends. If you know something we're missing, let us know.

Positions Yes, one stationary subject per sensor on every station in every project on your account, placed at the station's location from Stevens Connect. Subjects are named 'Station name - Sensor name', or 'Station name' when the sensor is the station itself. The Statistics and Diagnostic Parameters sensors are skipped.
Alerts and events No
Sensor readings Every channel the sensor reports, named as in Stevens Connect, with its value and unit and the channel's health percentage. A summary line lists them all, or only the channels you pick for that sensor in Featured Readings.
Photos and files No
Past data Yes. The first time Gundi sees a sensor, it fetches 7 days of history. You can set this to 1 to 15 days with Default Lookback Days in the Route settings. After that, each check picks up from the sensor's last reading.

How this integration works

This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.

Who's involved

  • You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
  • The data provider keeps your account and devices active.
  • Your destination, for example EarthRanger, is where the data shows up.
  • Gundi support helps only when the setup badge at the top of this page says so.

Historical data

When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.

When data doesn't show up

Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.

How often data arrives

Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.

Prerequisites

Stevens Connect

You will need:

  • The email and password of your Stevens Connect account

EarthRanger

To send data to EarthRanger, you will need:

  • A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. Please refer to EarthRanger's documentation or contact Support.
  • A long-lived token for authentication assigned to the user created in the previous step. Please refer to EarthRanger's documentation or contact Support.

Configuration in Gundi

Click on Create Route.

Select Stevens Connect.

Select your Workspace.

Enter a name for this Route (e.g., “Stevens Connect - AccountName”)

Enter the email and password of your Stevens Connect account.

Optional: 

  • Configure a number of lookback days.
  • Set up each sensor with a designated channel to display prominently on the EarthRanger map.

Learn more

Template:

Sensor name: channel name 1, channel name 2, ..

Examples

  • M 20: Depth m, Temp C
  • Mara River Purungat Bridge: Secondary Battery Charge, Mainboard Temperature
 
 

Click Next.

Click Add destination on the flow map and select a destination. Please consult our guides.

Next Steps

EarthRanger

The following configurations are optional:

1. Select the data you want to see in the map.

1.1. Log in to EarthRanger as an admin (site.pamdas.org/admin).
1.2. Go to Source Providers.
1.3. Select the Source Provider created for this integration (e.g., "gundi_stevensconnect_UUID")

The Source Provider is automatically created after Gundi successfully retrieves data from this integration and pushes it to EarthRanger. 

Please ensure your Route includes a destination, and review the Route Activity Logs for additional details. You should see some records mentioning that Gundi successfully delivered data to EarthRanger.

1.3. Click on Subject Details Configuration.
1.4. Configure the additional information you would like to see on the map.

2. Configure these Subjects as a “Weather Station”.

3. Assign your Subjects to a Subject Group.

Please refer to EarthRanger's documentation or contact Support.

Data Pull Frequency

Approximately every 10 minutes.

Other Weather Station

TAHMO ZENTRA Cloud Vital Weather
OpenWeather
Back to the integration catalog Need help setting this up? Contact us