Supported technology/Animal Tracking
| Direction | Data provider |
| Data | Movement data |
| Platform | Gundi v2 |
| Type | Pull integration |
Lotek sends GPS collar positions to EarthRanger through Gundi. Gundi checks your Lotek account on a schedule, and the positions show up as tracks on the map.
What you'll receive
We add details here as we confirm what Lotek sends. If you know something we're missing, let us know.
| Positions | Yes, from every device on your Lotek account, named after the device in Lotek. Fixes without a location are skipped. You can also set a Max PDOP in the Route settings to skip less accurate fixes. |
| Alerts and events | No |
| Sensor readings | Temperature, altitude, fix quality (PDOP), fix type, fix duration and two voltage readings, as Lotek reports them. |
| Photos and files | No |
| Past data | Yes. The first time Gundi sees a device, it fetches 7 days of history. You can set this to 1 to 60 days with Default lookback (days) in the Route settings. After that, each check covers new uploads from up to the last 12 hours. |
How this integration works
This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.
Who's involved
- You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
- The data provider keeps your account and devices active.
- Your destination, for example EarthRanger, is where the data shows up.
- Gundi support helps only when the setup badge at the top of this page says so.
Historical data
When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.
When data doesn't show up
Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.
How often data arrives
Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.
Prerequisites
Data Source
You will need:
- Lotek Web Service username and password.
Data Delivery
EarthRanger
To send data to EarthRanger, you will need:
- A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. Please refer to EarthRanger's documentation or contact Support.
- A long-lived token for authentication assigned to the user created in the previous step. Please refer to EarthRanger's documentation or contact Support.
Configuration in Gundi
Login to Gundi.
Click Create Route.
Select Lotek.
Configure your Lotek username and password.
Select your Workspace.
Enter a name for this Route under Route Name (e.g, Lotek - AccountName)
Click Next.
Click Add destination on the flow map and select a destination. Please consult our guide.
Next Steps
EarthRanger
The following configurations are optional:
1. Select the data you want to see in the map.
1.1. Log in to EarthRanger as an admin.
1.2. Go to
Source providers.
1.3. Click on
Subject Details Configuration.
1.4. Configure the additional
information you would like to see on the map.
2. Rename your Subjects.
3. Assign your Subjects to a Subject Group.
Please refer to EarthRanger's documentation or contact Support.
Data Pull Frequency
Approximately every 10 minutes.
Other Animal Tracking
| Argos | Africa Wildlife Tracking (AWT) | Advanced Telemetry Systems (or ATS) |
| Ceres Wild | digitanimal |
| Back to the integration catalog | Need help setting this up? Contact us |
