Wells Fargo Tracking

Supported technology/Vehicle Trackers

fargo.co.ke

Direction Data provider
Data Movement data
Platform Gundi v1
Type Pull integration

Setup Gundi support

Wells Fargo Tracking sends vehicle positions to EarthRanger through Gundi. Gundi checks your Wells Fargo Tracking account on a schedule, and each vehicle's latest position shows up on the map.

What you'll receive

We add details here as we confirm what Wells Fargo Tracking sends. If you know something we're missing, let us know.

Positions Yes, the latest position of every vehicle on your Wells Fargo Tracking account that reported since the previous check, named after the vehicle in Wells Fargo Tracking.
Alerts and events No
Sensor readings Speed, address, odometer and engine status, plus any sensor readings the vehicle reports, with their units.
Photos and files No
Past data No full history. The first check picks up each vehicle's latest position from the last 7 days. After that, each check sends the latest position of vehicles that reported since.

How this integration works

This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.

Who's involved

  • You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
  • The data provider keeps your account and devices active.
  • Your destination, for example EarthRanger, is where the data shows up.
  • Gundi support helps only when the setup badge at the top of this page says so.

Historical data

When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.

When data doesn't show up

Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.

How often data arrives

Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.

Prerequisites

Wells Fargo Tracking

You will need:

EarthRanger

To send event data to EarthRanger, you will need:

  • A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. 
    Please refer to EarthRanger's documentation or contact our Support team.
  • A long-lived token for authentication assigned to the user created in the previous step. 
    Please refer to EarthRanger's documentation or contact our Support team.

Configuration

GUIDES

Gundi Connection Settings

Go to Gundi v1

Go to the Inbound Integrations and select Add Integration

Follow these steps to configure the integration.

Name Enter a suitable name (e.g., "Sitename - Vehicle Tracking")
Owner Select the integration's owner
Type Wells Fargo
Provider Key Leave empty. It will automatically give it a name.
Default Device Group Leave empty. Gundi will automatically create a default group.
Endpoint https://api.3dtracking.net/api/v1.0/
Token Leave empty
Login/Password Username and password provided by the user
State
{}

Click Save

Configure the Default Device Group to select the destination site. 

2. EarthRanger Settings

The following configurations are optional:

2.1. Select the data you want to see in the map.

2.1.1 Log in to EarthRanger as an admin (site.pamdas.org/admin).
2.1.2 Go to Source Providers.
2.1.3 Select the Source Provider created for this integration (e.g., "wells_fargo_tracking")

The “Source Provider” is automatically created after Gundi successfully retrieves data from this integration and pushes it to EarthRanger. If you don't find it, please ensure your Route includes a destination, and review the Route Activity Logs for additional details. You should see some records mentioning that Gundi successfully delivered data to EarthRanger.
Important Note:  The integration might take 5 minutes to run. Please verify your connection after this period.

2.1.4 Click on Subject Details Configuration.
2.1.5 Configure the additional information you would like to see on the map.

2.2 Assign your Subjects to a Subject Group.

2.3 Rename your Subjects

Please refer to EarthRanger's documentation or contact Support.

TroubleShooting

Which vehicles are in my account? 

Run this script in your terminal to see a list of devices in your account. The table includes the vehicle name, UUID, and last reported time.

#!/bin/bash
# Fetch Wells Fargo / 3DTracking unit list
BASE="https://api.3dtracking.net/api/v1.0"
USER="your_username"
PASS="your_password

# 1. Authenticate -> get UserIdGuid + SessionId
AUTH=$(curl -s -G "$BASE/Authentication/UserAuthenticate" \
  --data-urlencode "username=$USER" \
  --data-urlencode "password=$PASS")
GUID=$(echo "$AUTH" | python3 -c "import sys,json;print(json.load(sys.stdin)['Result']['UserIdGuid'])")
SID=$(echo  "$AUTH" | python3 -c "import sys,json;print(json.load(sys.stdin)['Result']['SessionId'])")

# 2. Fetch positions reported in the last 14 days
SINCE=$(python3 -c "from datetime import datetime,timedelta;print((datetime.now()-timedelta(days=14)).strftime('%d %b %Y %H:%M:%S'))")
curl -s -G "$BASE/Units/LatestPositionsList" \
  --data-urlencode "UserIdGuid=$GUID" \
  --data-urlencode "SessionId=$SID" \
  --data-urlencode "LastDateReceivedUtc=$SINCE" \
| python3 -c "
import sys,json
res=json.load(sys.stdin).get('Result') or []
rows=sorted((str(u.get('Name')).strip(), str(u.get('Uid')), u.get('LastReportedTimeUTC')) for u in res)
print(f'{\"Name\":<14} {\"Uid\":<10} Last Reported (UTC)')
print('-'*52)
[print(f'{n:<14} {u:<10} {t}') for n,u,t in rows]
print(f'\nTotal units: {len(rows)}')
"

Data Pull Frequency

Approximately every 3 minutes.

Other Vehicle Trackers

Avis Pulse Baytrac BIDTRACK
CarTrack Gesfrota
Back to the integration catalog Need help setting this up? Contact us