Supported technology/Animal Tracking
This integration requires assistance from WildInno for setup and configuration. Please get in touch with our Support Team at support@earthranger.com and we’ll guide you through the process to ensure everything is set up correctly.
Prerequisites
WildInno
You will need:
- WildInno Account
Destination
EarthRanger
To send movement data to EarthRanger, you will need:
Please refer to EarthRanger's documentation or contact Support.
Please refer to EarthRanger's documentation or contact Support.
Integration Process Summary
- Set up a Route in Gundi. Contact our team if you need assistance.
- Share your Route API key with your WildInno contact.
- Wait for WildInno to configure Gundi as a data destination.
- Wait for your devices to send data through WildInno Gundi EarthRanger.
- Verify the integration and reach out for support as needed.
Configuration
GUIDES
1. Gundi Connection Settings
Login to Gundi.
Click on Create Route.
Select WildInno.
Select your Workspace.
Enter a name for this Route (e.g., “AccountName”)
Click Next.
Click Add destination on the flow map and select a destination. Please consult our guide.
2. Configure Data Provider
Visit the Connection you created during this process, and copy the API key. To do this, click the data provider node on the flow map, open the Connect section, find the API key field, select the text and copy it.
Send this API key, your WildInno account username, and your Workspace name to your contact at WildInno, requesting an integration with EarthRanger/Gundi.
Suggested Contacts:
- Jason Tarr - jason@wildinno.com
- Jock Donaldson - jock@awetelemetry.co.za
Characteristics
- This integration is classified as a “Push” type, meaning WildInno services send data to Gundi on their regular schedule, and Gundi immediately attempts to forward it to the destination specified in your Connection.
Note on Latency
The time it takes for data to appear in your destination system depends on several factors, such as latency introduced by the source, network conditions, and intermediary systems. While these factors may vary, Gundi typically checks for available data at scheduled intervals (approximately every 5 minutes).
If data is not available in your system after this interval, please check the source of the data for its availability. If the issue persists, contact our Support team for assistance.
Troubleshooting
If your devices are not showing in your desired destination (e.g, EarthRanger or Movebank), you can try these steps:
- Confirm if the data is available to WildInno. Contact someone at WildInno if you don't have access to this information or if you detect that the trackers are not sending data to their services.
- Ask our Support Team to investigate the connection between WildInno and your destination.
Other Animal Tracking