Supported technology/Vehicle Trackers
| Direction | Data provider |
| Data | Movement data |
| Platform | Gundi v2 |
| Type | Pull integration |
Galooli sends vehicle and asset positions to EarthRanger through Gundi. Gundi checks your Galooli account every 5 minutes, and the positions show up as tracks on the map.
What you'll receive
We add details here as we confirm what Galooli sends. If you know something we're missing, let us know.
| Positions | Yes, from every unit your Galooli account can see, named after the unit in Galooli. Records without a location or time are skipped, and repeated reports from a switched-off unit are sent only once. You can set the EarthRanger subject type with Subject Type in the Route settings. |
| Alerts and events | No |
| Sensor readings | Speed, distance, on/off status and the organisation name, as Galooli reports them. |
| Photos and files | No |
| Past data | Yes. The first check fetches the last 4 hours. You can set this to 1 to 24 hours with Look Back Window Hours in the Route settings. After that, each check covers updates since the last one. |
How this integration works
This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.
Who's involved
- You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
- The data provider keeps your account and devices active.
- Your destination, for example EarthRanger, is where the data shows up.
- Gundi support helps only when the setup badge at the top of this page says so.
Historical data
When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.
When data doesn't show up
Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.
How often data arrives
Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.
Prerequisites
Galooli
You will need:
- Galooli account ("Gold" or “Platinum”)
- User credentials with permissions to do API Queries (Username and Password)
EarthRanger
To send data to EarthRanger, you will need:
- A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. Please refer to EarthRanger's documentation or contact Support.
- A long-lived token for authentication assigned to the user created in the previous step. Please refer to EarthRanger's documentation or contact Support.
Configuration
GUIDES
1. Gundi Connection Settings
Click on Create Route.
Select Galooli.
Select your Workspace.
Enter a name for this Route (e.g., “Galooli - AccountName”)
Configure your Galooli credentials.
Optional:
- Set how many hours to look back on the first check (Look Back Window Hours, 1 to 24).
- Configure the GMT offset to configure the correct timezone.
Click Next.
Click Add destination on the flow map and select a destination. Please consult our guides.
2. EarthRanger Settings
The following configurations are optional:
2.1. Select the data you want to see in the map.
2.1.1 Log in to EarthRanger as an admin (site.pamdas.org/admin).
2.1.2 Go to
Source Providers.
2.1.3 Select the
Source Provider created for this integration (e.g.,
"gundi_galooli_UUID")
2.1.4 Click on Subject Details Configuration.
2.1.5 Configure the
additional information you would like to see on the map.
2.2 Assign your Subjects to a Subject Group.
Please refer to EarthRanger's documentation or contact Support.
Data Pull Frequency
Approximately every 5 minutes.
Other Vehicle Trackers
| Avis Pulse | Baytrac | BIDTRACK |
| CarTrack | Gesfrota |
| Back to the integration catalog | Need help setting this up? Contact us |
