Wialon

Supported technology/Vehicle Trackers

gurtam.com/en/wialon

Direction Data provider
Data Movement data
Platform Gundi v2
Type Pull integration

Setup You, in the portal

Wialon sends vehicle positions to EarthRanger through Gundi. Gundi checks your Wialon account on a schedule, and each unit's latest position shows up on the map.

What you'll receive

We add details here as we confirm what Wialon sends. If you know something we're missing, let us know.

Positions Yes, the latest position of every unit on your Wialon account, named after the unit in Wialon. A position is sent only when it is newer than the last one sent. Units with no position yet are skipped and listed in the Route Activity Logs.
Alerts and events No
Sensor readings Speed, heading, altitude, number of satellites and the sensor status flags, as Wialon reports them.
Photos and files No
Past data No. Each check sends only the latest position of each unit, so positions recorded between checks and earlier history are not fetched.

How this integration works

This is a pull integration. Gundi checks the data provider for new data on a schedule, using the account details you enter in the Route, and passes what it finds on to your destination.

Who's involved

  • You create the Route in Gundi and enter your provider account details, or give them to Gundi support when the setup badge says so.
  • The data provider keeps your account and devices active.
  • Your destination, for example EarthRanger, is where the data shows up.
  • Gundi support helps only when the setup badge at the top of this page says so.

Historical data

When you first connect, Gundi fetches a limited amount of past data. How far back it goes depends on the integration and is shown under "Past data" above.

When data doesn't show up

Check your Route Activity Logs first: wrong account details and provider outages show up there. Then check with the provider that your devices are reporting.

How often data arrives

Gundi checks on a schedule. Where we know how often, it's shown under "Data Pull Frequency" on this page. New data arrives after the next check, plus the time the device takes to upload it to the provider.

Prerequisites

Wialon

You will need:

  • Wialon API token.

EarthRanger

To send movement data to EarthRanger, you will need:

  • A special EarthRanger user (e.g., “Gundi Service Account”) for this integration. Please refer to EarthRanger's documentation or contact Support.
  • A long-lived token for authentication assigned to the user created in the previous step. Please refer to EarthRanger's documentation or contact Support.

Configuration

GUIDES

I. Gundi Connection Settings

Login to Gundi.

Click on Create Route.

Select Wialon.

Select your Workspace.

Enter a name for this Route (e.g., “Vehicle Tracker - AccountName”)

Configure your Wialon token. 

Note: If a token is not available but you have a valid username and password, refer to the “How to Create a Token” section at the end of this article.

Click Next.

Click Add destination on the flow map and select a destination. Please consult our guide.

II. EarthRanger Settings

The following configurations are optional:

1. Select the data you want to see in the map.

1.1. Log in to EarthRanger as an admin (site.pamdas.org/admin).
1.2. Go to Source Providers.
1.3. Select the Source Provider created for this integration (e.g., "gundi_wialon_UUID")

The “Source Provider” is automatically created after Gundi successfully retrieves data from this integration and pushes it to EarthRanger. If you don't find it, please ensure your Route includes a destination, and review the Route Activity Logs for additional details. You should see some records mentioning that Gundi successfully delivered data to EarthRanger.
Important Note:  The integration might take 5 minutes to run. Please verify your connection after this period.

1.3. Click on Subject Details Configuration.
1.4. Configure the additional information you would like to see on the map.

2. Assign your Subjects to a Subject Group.

Please refer to EarthRanger's documentation or contact Support.

How to Create a Token

This section is optional, only for users without an API Token for this integration.

Method 1:

Go to https://hosting.wialon.com/login.html?duration=0&flags=0x200&client_id=earthranger 

Add a valid Username and Password

Select Log In

Wait to be redirected to a page, and extract the token from the URL.

Method 2:

Go to https://hosting.wialon.com/login.html?duration=0&flags=0x200&client_id=earthranger 

Ask the user to log in to their Wialon dashboard.

Under “Session Management” create a token with “Online Tracking” permissions.

Data Pull Frequency

Approximately every 10 minutes.

Other Vehicle Trackers

Avis Pulse Baytrac BIDTRACK
CarTrack Gesfrota
Back to the integration catalog Need help setting this up? Contact us